![background image](http://html1.mh-extra.com/html/optigene/genie-ht/genie-ht_user-manual_1642323047.webp)
IFU_EN_GEN-HT Version 1.01
July2020
46
GENIE RESULT CALLING
OVERVIEW
Genie® instruments can generate results according to detected amplification times, anneal
peaks and other features. Due to the varying requirements of differing applications, setting up
the parameters is highly flexible.
Analysis is based on
targets
, where each target has its own set of parameters and possible
results. Each well can have up to three targets assigned for multiplex applications.
The target parameters specify the fluorescence channel, target type and various signal
processing options.
Detection starts with examining
regions
of interest on various graphs for required
features
.
The presence or absence of features in the regions determine which
result
is displayed for the
well. The presence or absence of control targets in other wells can also be included in the
determination.
Advanced features allow regions to be defined relative to other regions or the results of other
targets.
For multi-well assays, that may use the whole strip and where more than positive & negative
controls are needed, an overall result can be determined.
Chapter
Chapter