Opticon OPR 3001 Скачать руководство пользователя | Manualshive

Страница: 2 / 42

background image

Opticon

OPR 3001

Specifications Manual

2

All information subject to change without notice.

Document History

Model Number:

OPR 3001

Specification Number:

SS06106

Edition:

2A

Original Spec Number:

SS06080

Date:

2006-12-27

Copyright 2006 Opticon. All rights reserved.

This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or
machine readable form without prior written consent of Opticon.

Limited Warranty and Disclaimers
PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE

PRODUCT.

Serial Number

A serial number appears on all Opticon products. This official registration number is directly related to the device
purchased. Do not remove the serial number from your Opticon device. Removing the serial number voids the warranty.

Warranty

Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and
workmanship for two years after purchase. Opticon will repair or, at its option, replace products that are defective in
materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused by
modifications made by a customer. In such cases, standard repair charges will apply. If a product is returned under
warranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect,
consequential or incidental damages arising out of use or inability to use both the hardware and software, even if Opticon
has been informed about the possibility of such damages.

Packaging

The packing materials are recyclable. We recommend that you save all packing material to use should you need to
transport your scanner or send it for service. Damage caused by improper packaging during shipment is not covered by
the warranty.

Trademarks

Trademarks used are the property of their respective owners.

Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of OPTOELECTRONICS Co., Ltd., 12-17,
Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002. TEL +81-(0) 48-446-1183; FAX +81-(0) 48-446-1184

SUPPORT

USA Europe

Phone: 800-636-0090

Email: [email protected]

Email: [email protected]

Web: www.opticonusa.com

Web: www.opticon.com

«
1
2
3
4
...
»

Содержание OPR 3001











































Отзывы:

Нет отзывов

Похожие инструкции для OPR 3001

Бренд: Kanguru Страницы: 1

Бренд: Kantech Страницы: 2

Бренд: IDTECH Страницы: 4

StrataScan 2755-LHR-3C

Бренд: Allen-Bradley Страницы: 68

Бренд: Conrad Страницы: 4

Бренд: Atid Страницы: 33

Бренд: Psion Teklogix Страницы: 20

Falcon 4400 Series

Бренд: PSC Страницы: 68

Бренд: Leuze electronic Страницы: 22

Бренд: ViewSonic Страницы: 2

Бренд: Datalogic Страницы: 20

Бренд: Datalogic Страницы: 56

Бренд: M3 Mobile Страницы: 9

Бренд: Uconnect Страницы: 4

Бренд: Boox Страницы: 31

Бренд: Hand Held Products Страницы: 67

MagneSafe D99875494-52

Бренд: Magtek Страницы: 19

Бренд: Samsung Страницы: 29

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды