background image

Opticon 

OPR 3001 

Specifications Manual 

 
 
 
 

 

Contents 

1.

 

Abstract ....................................................................................................................................... 7

 

2.

 

Overview...................................................................................................................................... 7

 

3.

 

Physical Features ....................................................................................................................... 8

 

3.1.

 

Dimensions ......................................................................................................................... 8

 

3.2.

 

Weight ................................................................................................................................. 8

 

4.

 

Environmental Specifications ................................................................................................... 8

 

4.1.

 

Operating Temperature and Humidity................................................................................. 8

 

4.2.

 

Storage Temperature and Humidity .................................................................................... 8

 

4.3.

 

Ambient Light Immunity....................................................................................................... 8

 

5.

 

Electrical Specifications ............................................................................................................ 9

 

5.1.

 

Electrical Characteristics..................................................................................................... 9

 

6.

 

Optical Specifications .............................................................................................................. 10

 

6.1.

 

Laser Scan Specifications................................................................................................. 10

 

6.1.1.

 

Tilt of Laser Scan Line .............................................................................................................10

 

6.1.2.

 

Curvature of Scan ....................................................................................................................11

 

7.

 

Technical Specifications.......................................................................................................... 11

 

7.1.

 

Print Contrast Signal (PCS) .............................................................................................. 12

 

7.2.

 

Minimum Resolution.......................................................................................................... 12

 

7.3.

 

Scan Area and Resolution ................................................................................................ 12

 

7.3.1.

 

Depth of Field...........................................................................................................................12

 

7.4.

 

Pitch, Skew, and Tilt.......................................................................................................... 14

 

7.4.1.

 

Pitch Angle...............................................................................................................................14

 

7.4.2.

 

Skew Angle and Dead Zone ....................................................................................................15

 

7.4.3.

 

Tilt Angle ..................................................................................................................................16

 

7.5.

 

Curvature .......................................................................................................................... 17

 

8.

 

Interface Specifications ........................................................................................................... 17

 

8.1.

 

RS-232C Interface Specification ....................................................................................... 17

 

8.1.1.

 

Settings and Communication ...................................................................................................17

 

8.1.2.

 

Signal Level..............................................................................................................................18

 

8.1.3.

 

Interface Circuit........................................................................................................................18

 

8.1.4.

 

Character Format.....................................................................................................................19

 

8.1.5.

 

Communication Format............................................................................................................19

 

Содержание OPR 3001











































Отзывы: