Optical Systems Design OSD2700SFP SERIES, Руководство оператора

Страница: 79 / 223

OPTICAL SYSTEMS DESIGN
DOC ID: 10112704
OSD2700SFP OPERATOR MANUAL
PAGE 79
MAC Access List:
1.
Access List Type: Click “Access List Type” drop-down menu to choose “MAC Access List” from
the “Access List Type” drop-down list to create new MAC Access List or modify a MAC Access
List.
2. Access List: Click “Access List” drop-down menu to choose “Create” or “Access List” from the
“Access List” drop-down list to create new Access List or modify an Access List.
3. Access List (2000-2699): Click in the “Access List (2000-2699)” textbox and specify a MAC
Access List
number
2000 ~ 2699
for Access List.
4. Action: Click “Action” drop-down menu from “Action” drop-down list to choose “permit” or
“deny” to p
ermit or deny certain traffic if conditions matched
.
5. Source MAC: Click in the “Source MAC” textbox and specify the MAC address of o riginating
network or host sending packet.
6. Mask: Click in the “Mask” textbox and specify the
Wildcard bits in dotted decimal notation to
apply to the source. Ones go in bit positions to ignore.
Example: MAC Address: 001a.4d9f.ab89. Mask: 0.0.ff. Then MAC address 001a.4d9f.ab00 ~
001a.4d9f.abff would be permitted or denied.
7. Destination MAC: Click in the “Destination MAC” textbox and specify the MAC address of h
ost
receiving packet.
8. Mask: Click in the “Mask” textbox and specify the Wildcard bits in dotted decimal notation to
apply to the destination. Ones go in bit positions to ignore.
Example: Destination Address: 001b.4c94.4567. Mask: 0.0.eff. Then MAC address
001b.4c94.4000 ~ 001b.4c94.4eff would be permitted or denied.
9. Format: Click “Format” drop-down menu to choose “Ethernet II”, “SNAP”, “802.3”, or “LLC”
from the “Format” drop-down list.
10. Ether type: Click in the “Ether type” textbox and specify the Ether type for
packet.
11. Mask: Click in the “Mask” textbox and specify the
Wildcard bits to apply to the Ether type.
12. Add: Click “Add” button to add MAC Access List number.
13. Submit: Click “Submit” button when you finished ACL Configuration settings.