Optical Systems Design OSD2700SFP SERIES, Руководство оператора

Страница: 215 / 223

OPTICAL SYSTEMS DESIGN
DOC ID: 10112704
OSD2700SFP OPERATOR MANUAL
PAGE 215
leave Type of timer
leaveall Type of timer
TIMER_VALUE Timervalue in centiseconds.
IF_NAME Specify the name of the interface.
4.
Example:
The following example sets the join timers 100 centiseconds for interface fe1 (port 1):
switch_a(config)#set gmrp join timer 100 fe1
switch_a(config)#
DHCP SERVER
DHCP Binding Table:
1.
Command Mode: Privileged Exec mode
Logon to Privileged Exec Mode (Enable Mode).
The
switch_a# prompt will show on the screen.
switch_a#
2.
Usage:
Use show dhcp-server binding command to display DHCP Server information.
3.
Command Syntax:
show dhcp-server binding
4.
Example:
The following example displays DHCP Server information:
switch_a#show dhcp-server binding
DHCP Server Status:
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
vlan1.1 means vlan 1.
The
switch_a(config-if)# prompt will show on the screen.
switch_a(config)#interface vlan1.1
switch_a(config-if)#
2.
Usage:
Use dhcp-server enable command to start the DHCP Server.
Use
no dhcp-server enable
command to disable DHCP Server.
3.
Command Syntax:
(no) dhcp-server enable
4.
Example:
The following example starts the DHCP Server:
switch_a(config)#interface vlan1.1
switch_a(config-if)#dhcp-server enable
switch_a(config-if)#
DHCP Server Range:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).