- 8 -
- 9 -
ENGLISH
FRANÇAIS
DEUTSCH
IT
ALIANO
ESP
AÑOL
8
8-1
Masking the Detection Areas using
Masking Plates
The near area mirror mounted in the main unit has 2 near
masking plates; one at the right side of this mirror and another
at the left side of this mirror. You can mask the detection area
by changing the position of these masking plates.
Cautions>>
You can mask the outside detection areas only; they are
areas and 6. Use the area masking seals (an accessory)
to mask the other detection areas (see Step 8-2).
Applicable
models
SIP-3020/5
SIP-4010/5
SIP-404/5
6 4 2 5 3 1
0
[m]
5
5
0
5
0
5
[ft.]
30
20
0
0
0
20
30
40
50
50
40
6
5
4
3
2
MASKING THE NEAR AREA SENSOR
Applicable
models
SIP-3020/5
SIP-4010/5
SIP-404/5
1
2
3
4
[m]
5
0
5
[ft.]
0
0
0
[m]
5
0
5
[ft.]
0
0
0
4
3
2
3
2
SIP-400/5
SIP-404/5
Far area mirror
Rib
Rib
Rib
Near area mirror
2
Attach the masking plate to the mirror,
and secure it to the ribs.
3
Insert the fixing rubber form to secure
the knob of the masking plate.
1
Remove the masking plate from the
storage, and check the detection
area and the mirror you use by
referring to the area chart.
2
Attach the masking plate to the mirror, and
secure it to the ribs.
3
Insert the fixing rubber form to secure the
knob of the masking plate.
1
Remove the masking plate
from the storage, and
check the detection area
and the mirror you use by
referring to the area chart.
Rib
If tree branches or other moving objects
are in the path of the detection beam.
If tree branches or other moving objects
are in the path of the detection beam.
