Opex Eagle Remittance Processor Скачать руководство пользователя страница 57

Страница: 57 / 108

Operating the System

Eagle Operator Manual

OPEX Corporation

Table 4-2 describes the reasons for envelopes and documents to be outsorted.

Keep in mind that this information is based on the default settings and may

change slightly depending on your job.

Note:

See Appendix B: “Outsorts, Reunites, and Rejects” for detailed

information on the individual messages.

4.5.3.2. Stacker bins

The stacker modules contain the documents and checks extracted from the

envelopes. Depending on the configuration of the job, certain documents and

checks will go to certain bins.

Table 4-2: Outsorts, rejects and reunites

Outsort

destination

Reason for outsorting

What to do with it

Outsort bins

(Bin 1, Bin 2)

Envelopes that do not meet

the job’s expectations

Envelopes sent to Bin 1

cannot be run through the

machine again; envelopes

sent to Bin 2 may be placed

back onto the main feeder

Extract pit

Envelopes that were cut

open but the documents

were not extracted properly

Remove the contents and

prepare them for the refeeder

Reunite bin

Envelopes and contents

that were reunited. Could

be due to the envelope and

check or document sticking

together.

Separate the envelope and

contents and prepare the

contents for the refeeder

Singulator pit

Contents were extracted

but not separated enough

to be imaged

Prepare for the refeeder

Bin 0

Reject bin(s)

Stubs and checks that were

not imaged properly; MICR

or OCR information was not

read properly; could not

orient items, etc.

Prepare for the refeeder or

transport

Содержание Eagle Remittance Processor













































































































Результаты поиска

Содержание Eagle Remittance Processor

Отзывы:

Похожие инструкции для Eagle Remittance Processor

Бренды по названию

Популярные бренды

Opex Eagle Remittance Processor, Руководство оператора

Результаты поиска

Содержание Eagle Remittance Processor

Отзывы:

Похожие инструкции для Eagle Remittance Processor

Бренды по названию

Популярные бренды