It can happen that both of the names input
are too different for the voice control
system, which then rejects them. Y o u c a n
then decide if you w a n t to input the names
again or end the process.
- " Y e s "
Input the names a g a i n .
- " N o " / " C a n c e l "
The dialogue is ended without
anything being s a v e d .
In order to prevent a cut-off at the
beginning of the recording when
names are being s a v e d , a short pause
should be left after the request for an
input.
In order to be able to use the voice t a g
independently of the location, i. e. in
other countries, all telephone numbers
should be entered with a " P l u s " a n d
the country code.
Example of a n a m e being saved as a voice
t a g :
User: Call.
Voice output: N a m e or number?
User: N a m e .
Voice output: The n a m e , please!
User: Time clock.
Voice output: The number, please!
User: Plus four nine.
Voice output: Plus four nine.
U s e r : Seven three one.
Voice output: Seven three one.
User: O n e one nine one.
Voice output: O n e one nine one.
User: S a v e .
Voice output: "Time clock" is s a v e d .
Voice output: W o u l d you like to enter
the n a m e in the
phonebook?
User: Y e s .
Delete
Using the "Delete" c o m m a n d , you c a n
delete a previously s a v e d voice t a g .
Phonebook
Using the command "Phonebook", you
can dial a previously saved voice t a g which
you have included in your directory. Y o u
c a n also delete a voice t a g . After inputting
the " P h o n e book" c o m m a n d , you will be
asked to input a name.
After the recognised n a m e has been
output, you c a n input the following
commands:
- " C a l l "
The connection to the s a v e d number is
created.
- " D e l e t e "
The voice t a g is deleted.
- " C a n c e l "
The dialogue is ended.
- " H e l p "
The dialogue is ended a n d all
commands available in this context
are listed.
24
