manualshive.com logo in svg

Onkyo TX SR507 - AV Receiver, Инструкция по эксплуатации

AV-ресивер Onkyo TX SR507 - это высококачественное устройство для воспроизведения аудио. Полное руководство пользователя доступно для бесплатного скачивания на нашем сайте. Не забудьте загрузить инструкцию перед началом использования для оптимального опыта работы с аппаратом. Скачать его с manualshive.com.

Поделиться
Скачать
background image

71

Advanced Setup

—Continued

With the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like.

Audio Adjust Settings

3. Audio Adjust

3-1. Mux/Mono (Multiplex/Mono)

Input (Mux)

Main:

The main channel is output (default).

Sub:

The sub channel is output.

M/S:

Both the main and sub channels are output.

This setting determines which channel of a stereo multiplex source is output. Use it to select audio channels or 
languages with multiplex sources, multilingual TV broadcasts, and so on.

Input (Mono)

 

L+R:

Both the left and right channels are output (default).

L:

Only the left channel is output.

R:

Only the right channel is output.

This setting determines which channel is output when the Mono listening mode is used with a stereo source.

3-2. Dolby

These settings apply to only 2-channel stereo sources.
If you’re not using any surround back speakers, these settings apply to Dolby Pro Logic II, not Dolby Pro Logic IIx.

Panorama

On:

Panorama function on.

Off:

Panorama function off (default).

With this setting, you can broaden the width of the front stereo image when using the Dolby Pro Logic IIx Music 
listening mode.

Dimension

–3 to +3 (default: 0)

With this setting, you can move the sound field forward or backward when using the Dolby Pro Logic IIx Music 
listening mode. Higher settings move the sound field backward. Lower settings move it forward.
If the stereo image feels too wide, or there’s too much surround sound, move the sound field forward to improve 
the balance. Conversely, if the stereo image feels like it’s in mono, or there’s not enough surround sound, move 
it backward.

Center Width

0 to 7 (default: 3)

With this setting, you can adjust the width of the sound from the center speaker when using the Dolby Pro Logic 
IIx Music listening mode. Normally, if you’re using a center speaker, the center channel sound is output by only 
the center speaker. (If you’re not using a center speaker, the center channel sound will be distributed to the front 
left and right speakers to create a phantom center.) This setting controls the front left, right, and center mix, 
allowing you to adjust the weight of the center channel sound.

Dolby EX

Dolby EX

Auto:

  If the source signal contains a Dolby EX flag, the Dolby EX listening mode is 

used.

Manual:

 You can select any available listening mode (default).

This setting determines how Dolby EX encoded signals are handled. This setting is unavailable if no surround 
back speakers are connected. This setting is effective with Dolby Digital, Dolby Digital Plus and Dolby TrueHD 
only.

Notes:

• If the “SurrBack” Setting is set to “None”, this setting cannot be selected (see page 67 or 68).
• (TX-SR577) If the “FrontH” Setting is set besides “None”, this setting is fixed at “Manual” (see page 68).

Содержание TX SR507 - AV Receiver





































































































Отзывы:

Нет отзывов

Похожие инструкции для TX SR507 - AV Receiver

CAME BPT OPALE User Manual preview
OPALE
Бренд: CAME BPT Страницы: 48
Strong SRT 6016 User Manual preview
SRT 6016
Бренд: Strong Страницы: 25
Strong SRT 6004 User Manual preview
SRT 6004
Бренд: Strong Страницы: 24
Insignia NS-C5112 User Manual preview
NS-C5112
Бренд: Insignia Страницы: 44
X10 VK72A Owner'S Manual preview
VK72A
Бренд: X10 Страницы: 9
Dish Network Satellite Television User Manual preview
Satellite Television
Бренд: Dish Network Страницы: 134
B&K AVR 705 Quick Start Manual preview
AVR 705
Бренд: B&K Страницы: 12
T+A Elektroakustik K 6 User Manual preview
K 6
Бренд: T+A Elektroakustik Страницы: 60
Aquatic AQ-IP-3B Instruction Manual preview
AQ-IP-3B
Бренд: Aquatic Страницы: 22
Sealey VS2074 Instructions preview
VS2074
Бренд: Sealey Страницы: 2
Peavey Pro Comm PCX-U1002 Operating Manual preview
Pro Comm PCX-U1002
Бренд: Peavey Страницы: 36
AAMP Global STINGER STXJLSBA Installation Manual preview
STINGER STXJLSBA
Бренд: AAMP Global Страницы: 7
Midland 445 BT Instruction Manual preview
445 BT
Бренд: Midland Страницы: 20
PRAXSYM 5500 User Manual preview
5500
Бренд: PRAXSYM Страницы: 22
Kenwood DDX6019 - DVD Player With LCD Monitor Installation Manual preview
DDX6019 - DVD Player With LCD Monitor
Бренд: Kenwood Страницы: 24
Kenwood DDX4038 Installation Manual preview
DDX4038
Бренд: Kenwood Страницы: 8
Kenwood DDX5022 Installation Manual preview
DDX5022
Бренд: Kenwood Страницы: 12
Kenwood DDX6029 Installation Manual preview
DDX6029
Бренд: Kenwood Страницы: 72

Бренды по названию

Популярные бренды

Загрузить еще бренды