Onkyo TX SR507 - AV Receiver Скачать руководство пользователя

Страница: 59 / 100

Using the Listening Modes

For a description of each listening mode, see “About the
Listening Modes” on page 64.

Selecting on the AV receiver

■

[PURE AUDIO] button
(not North American / Taiwan models)

This button selects the Pure Audio listening mode.
When this mode is selected, the AV receiver’s
display is turned off and only the HDMI outputs
output video signals. Pressing this button again will
select the previous listening mode.

■

LISTENING MODE buttons

[MOVIE/TV] button

This button selects the listening modes intended for
use with movies and TV.

[MUSIC] button

This button selects the listening modes intended for
use with music.

[GAME] button

This button selects the listening modes intended for
use with video games.

Selecting with the Remote Controller

■

LISTENING MODE buttons

[MOVIE/TV] button

This button selects the listening modes intended for
use with movies and TV.

[MUSIC] button

This button selects the listening modes intended for
use with music.

[GAME] button

This button selects the listening modes intended for
use with video games.

[STEREO] button

This button selects the Stereo listening mode and All
Channel Stereo listening mode.

Selecting the Listening Modes

• The Dolby Digital and DTS listening modes can

only be selected if your DVD player is
connected to the AV receiver with a digital
audio connection (COAXIAL, OPTICAL, or
HDMI).

• The listening modes you can select depends on

the format of the input signal. To check the
format, see “Displaying Source Information”
on page 47.

• While a pair of headphones is connected, you

can only select the Pure Audio, Mono, Direct,
or Stereo listening mode.

PURE AUDIO

GAME

MOVIE/TV

MUSIC

Press the [RECEIVER] button,
and then press the LISTENING
MODE button repeatedly to
select the listening mode.

STEREO

GAME

MOVIE/TV

MUSIC

Содержание TX SR507 - AV Receiver





































































































Результаты поиска

Содержание TX SR507 - AV Receiver

Отзывы:

Похожие инструкции для TX SR507 - AV Receiver

Бренды по названию

Популярные бренды

Onkyo TX SR507 - AV Receiver, Инструкция по эксплуатации

Результаты поиска

Содержание TX SR507 - AV Receiver

Отзывы:

Похожие инструкции для TX SR507 - AV Receiver

Бренды по названию

Популярные бренды