FIRMWARE UPDATE -3
TX-SR806/SA806
Main Microprocessor Update Procedure
2. Click
"Main Update"
button. The update takes about 15 minutes.
The message on Front Display will change as follows.
3. After the update ends, unplug the power code, remove the jig from the unit, and plug it again.
4. Turn on the unit and initialize it by holding down
[VCR/DVR]
button and the pressing
[ON/STANDBY]
button.
Confirm the new version number.
O K : S u m = 3 5 C F C C 4 5 h
S e a r c h F / W. . .
F W U p d a t e 0 1 0 0 0
1. Double click
"Update.exe"
in the unzipped folder
"Update_SR806Main1.0.zip”
(Folder name depends on the version.)
The following window will appear.
This information will appear when
the click of [Main Update] is accepted.
If it is ticked, Log appears
while writing is proceeding.
