Onkyo R-N855, Инструкция по эксплуатации

Страница: 7 / 44

En-
7
Rear Panel
1. AC INLET : Connect the supplied power cord.
2. USB port: Connect a USB storage device or HDD
(hard disk drive) to play music files. You can also
supply power (maximum 5 V/1 A) to USB devices with
a USB cable.
3. DIGITAL IN OPTICAL terminal : Input digital audio
signals from an external device, such as a TV or CD
player, with a digital optical cable.
4. DIGITAL IN COAXIAL terminal : Input digital audio
signals from an external device, such as a TV or CD
player, with a digital coaxial cable.
5. ETHERNET port : Connect to the network with an
Ethernet cable.
6. Wireless antenna : Used for Wi-Fi connection or when
using a BLUETOOTH enabled device. Adjust their
angles according to the connection status.
7. GND terminal : Connect if the turntable connected to
the PHONO IN jack has a ground wire.
8. SPEAKER terminals : Connect speakers with speaker
cables.
9. LINE OUT jacks : Connect a recording device such as
a cassette tape deck with an analog audio cable. You
can also connect a subwoofer with built-in amplifier
with a subwoofer cable. (
P10, 31 “LINE OUT/SW”)
10.PHONO IN jacks : Connect a turntable (MM cartridge).
11. LINE IN jacks : Input audio signals from an external
device, such as a TV or CD player, with an analog
audio cable.
12.ANTENNA DAB terminal : Connect the supplied DAB/
FM wire antenna.
13. REMOTE CONTROL jacks : Connect an Onkyo
product with an RI jack using an RI cable to
synchronize with this unit. (
P24)

     
     
180°
90°

SN29402579_R-N855_En_1608xx.book 7 ページ ２０１６年９月１３日 火曜日 午前９時１２分