Onkyo R-N855, Инструкция по эксплуатации

Страница: 18 / 44

En-
18
Listening to the FM/DAB Radio
Listening to FM Radio
Tuning Automatically
1. Turn the unit on.
2. Repeatedly press TUNER to switch input to FM.
3. When you press / (a) on the remote controller,
automatic tuning starts, and searching stops when a
station is found. “FM ST” indicator on the display lights
when FM stereo station is being received.
When FM broadcasts are difficult to receive : Perform
the procedure for “Tuning Manually”. If you tune
manually, the reception for FM broadcasts will be
monaural rather than stereo, irrespective of the
sensitivity of the reception.
Tuning Manually
1. Turn the unit on.
2. Repeatedly press TUNER to switch input to FM.
3. Press ENTER (c) on the remote controller so that the
“AUTO” indicator on the display goes off.
4. Select the station you want to listen to while pressing
/ (a) on the remote controller.
0
The frequency changes by 1 step each time you
press the button. The frequency changes
continuously if the button is held down and stops
when the button is released. Tune by looking at the
display.
0
After pressing PUSH TO ENTER on the main unit
until the frequency display flashes, you can turn the
dial left or right to tune stations.
Directly inputting the frequency
It allows you to directly enter the frequency of the radio
station you want to listen to.
1. Turn the unit on.
2. Repeatedly press TUNER to switch input to FM.
3. Press CAPS (d) on the remote controller.
4. Press the number buttons (f) on the remote controller
to enter the frequency of the radio station within 8
seconds.
0
To enter 87.50, for example, press 8, 7, 5, 0. If you
enter the wrong number, press CAPS (d) and re-
enter.
Using RDS
RDS stands for Radio Data System and is a method of
transmitting data in FM radio signals. In regions using
RDS, the radio station name is displayed when you tune
into a radio station broadcasting program information.
When you press DISPLAY (e) on the remote controller in
this state, you can use the following functions.
Displaying text information (Radio Text):
1. While the name of the station is being displayed on the
display, press DISPLAY (e) on the remote controller
once.
Radio Text (RT) broadcast by the station is displayed
scrolling across the display. “No Text Data” is
displayed when no text information is available.
0
Unusual characters may be displayed when the unit
receives unsupported characters. However, this is not
a malfunction. Also, if the signal from a station is weak,
information may not be displayed.
Search for stations by Program Type:
1. While the name of the station is being displayed on the
display, press DISPLAY (e) on the remote controller
twice.
2. Press / (b) on the remote controller to select the
Program Type you want to find, then press ENTER (c)
to start the search.
The Program Types displayed are as follows:
None
News (News reports)
Affairs (Current affairs)
Info (Information)
Sport
Educate (Education)
Drama
Culture
Science (Science and technology)
Varied
Pop M (Pop music)
Rock M (Rock music)
Easy M (Middle of the road music)
Light M (Light classics)
a
c
b
d
f
e
FM 87 . 50MHz
FM 87 . 50MHz
SN29402579_R-N855_En_1608xx.book 18 ページ ２０１６年９月１３日 火曜日 午前９時１２分