28
En
When you connect an
u
-capable Onkyo component, you
must configure the input display so that
u
can work
properly.
This setting can be done only from the front panel.
Note
•
DOCK
can be selected for the
TAPE
,
GAME
or
VCR/DVR
input selector, but not at the same time.
• Enter the appropriate remote control code before using the
remote controller for the first time (
➔
86
).
Note
• Always turn down the volume before connecting your head-
phones.
• While the headphones plug is inserted in the
PHONES
jack, the
Headphone indicator, speaker/channel indicator
FL
and
FR
lights.
• When you connect a pair of headphones, the listening mode is
set to Stereo, unless it’s already set to Stereo, Mono, Direct, or
Pure Audio.
• Only the Stereo, Direct, Pure Audio, and Mono listening modes
can be used with headphones.
You can use
ACTIVITIES
to execute a number of remote
control operations with a single button.
This button has the following two modes.
`
Easy Macro mode:
You can turn on and off the AV controller, playback
components and TV.
`
Normal Macro mode:
You can assign desired operations (
➔
91
,
93
).
Note
• If you set any one of the
ACTIVITIES
to Normal Macro mode,
all the
ACTIVITIES
will be set to Normal Macro mode.
• To use
ACTIVITIES
, first assign the remote control codes of the
AV components you are using (
➔
88
).
Starting Components Using ACTIVITIES
*1
Depending on the start-up time of the playback component,
the AV controller may not be able to activate the playback
command. In this case, press
1
on the remote controller.
Changing the Input Display
1
Press
TAPE
,
GAME
or
VCR/DVR
so that
“TAPE”, “GAME” or “VCR/DVR” appears on
the display.
2
Press and hold down
TAPE
,
GAME
or
VCR/DVR
(about 3 seconds) to change the input display.
Repeat this step to select “
MD
”, “
CDR
” or
“
DOCK
”.
For the
TAPE
input selector, the input display
changes in this order:
For the
GAME
input selector, the setting changes in
this order:
For the
VCR/DVR
input selector, the setting
changes in this order:
Using Headphones
Connect a pair of stereo headphones with a stan-
dard plug (1/4 inch or 6.3 mm) to the
PHONES
jack.
TAPE
→
MD
→
CDR
DOCK
→
→
GAME
↔
DOCK
VCR/DVR
↔
DOCK
Using ACTIVITIES to Start Easy Macros
Press
MY MOVIE
,
MY TV
, or
MY MUSIC
.
At purchase,
ACTIVITIES
are set to Easy Macro
mode as the default setting.
The default actions are described below.
MY MOVIE
:
1. The TV turns on.
2. The playback component assigned to
BD/DVD
of
REMOTE MODE
turns on.
3. The AV controller turns on.
4. The input selector of the AV controller is set to
BD/DVD
.
5. Playback begins on the playback component
assigned to
BD/DVD
.
*1
MY TV
:
1. The TV turns on.
2. The playback component assigned to
CBL/SAT
of
REMOTE MODE
turns on.
3. The AV controller turns on.
4. The input selector of the AV controller is set to
CBL/SAT
.
MY MUSIC
:
1. The playback component assigned to
TV/CD
of
REMOTE MODE
turns on.
2. The AV controller turns on.
3. The input selector of the AV controller is set to
TV/CD
.
4. Playback begins on playback component
assigned to
TV/CD
.
*1
Note
• After pressing one of the
ACTIVITIES
, you cannot use
other
ACTIVITIES
until the assigned actions have been
completed.
• If you wish to use another of the
ACTIVITIES
after start-
ing, press
ALL OFF
and then press the desired
ACTIVI-
TIES
.