58
En
■
Blue Contrast
*2*4
`
–50
to
0
to
+50
With this setting you can adjust blue contrast. “
–50
”
is the least. “
+50
” is the greatest.
Tip
*1
This procedure can also be performed on the remote controller
by using the Home menu (
➔
27
).
*2
Press
CLR
if you want to reset to the default value.
Note
• If you are using the analog RGB input, the following settings
have no effect: “
Film Mode
”, “
Edge Enhancement
”, “
Mos-
quito NR
”, “
Random NR
” and “
Block NR
”.
• “
Picture Adjust
” is not operable when the input selector is set
to “
NET/USB
”.
*3
These settings have no effect in the case of HD input source
(720p,1080i,1080p,1080p/24).
*4
When the “
Picture Mode
” setting is set to anything other than
“
Custom
”, this setting cannot be used.
*5
Depending on the input and output resolutions, “
Smart
Zoom
” may not be used.
*6
When the “
Game Mode
” setting is set to “
On
”, this setting
cannot be selected.
*7
This setting has no effect in the case of downconversion.
You can assign a default listening mode to each input
source that will be selected automatically when you select
each input source. For example, you can set the default lis-
tening mode to be used with Dolby Digital input signals.
You can select other listening modes during playback, but
the mode specified here will be resumed once the AV con-
troller has been set to Standby.
Main menu
Listening Mode Preset
■
Analog/PCM
With this setting, you can specify the listening mode to
be used when an analog (CD, TV, LD, VHS, MD, turn-
table, radio, cassette, cable, satellite, etc.) or PCM digi-
tal (CD, DVD, etc.) audio signal is played.
■
Mono/Multiplex Source
With this setting, you can specify the listening mode to
be used when a mono digital audio signal is played
(DVD, etc.).
■
2ch Source
With this setting, the default listening mode for 2-chan-
nel (2/0) stereo sources in a digital format, such as
Dolby Digital or DTS.
■
Dolby D/Dolby D Plus/TrueHD
With this setting, you can specify the listening mode to
be used when a Dolby Digital or Dolby Digital Plus for-
mat digital audio signal is played (DVD, etc.). Specifies
the default listening mode for Dolby TrueHD sources,
such as Blu-ray or HD DVD (input via HDMI).
■
DTS/DTS-ES/DTS-HD
With this setting, you can specify the listening mode to
be used when a DTS or DTS-HD High Resolution
Audio format digital audio signal is played (DVD, LD,
CD, etc.). Specifies the default listening mode for DTS-
HD Master Audio sources, such as Blu-ray or HD DVD
(input via HDMI).
■
Other Multich Source
Specifies the default listening mode for multichannel
PCM sources from
HDMI IN
such as DVD-Audio, and
DSD multichannel sources such as Super Audio CD.
Listening Mode Preset
1
Use
q
/
w
to select the input source that you want to
set, and then press
ENTER
.
The following menu appears.
For “
TUNER
” input selector only “
Analog
” will be
available. For “
NET/USB
” input source only “
Digi-
tal
” will be available.
Note
• If you connect an input component (such as UP-A1 series
Dock that seated iPod) to the
UNIVERSAL PORT
jack,
you can assign only listening modes for the analog sound
to “
PORT
” selector.
2
Use
q
/
w
to select the signal format that you want
to set, and then use
e
/
r
to select a listening mode.
Only listening modes that can be used with each
input signal format can be selected (
➔
37
to
42
)
.
The “
Last Valid
” option means that the listening
mode selected last will be used.
The “
Straight Decode
” option means that straight
decoding listening mode (Dolby Digital, DTS, etc.)
is selected.
1. BD/DVD
2. VCR/DVR
3. CBL/SAT
4. GAME
5. PC
6. AUX
5. Listening
Mode
Preset