Oneida Air Systems XXK050100, Руководство пользователя

Страница: 13 / 21

O.A.S. 2008
c 5 - 7.5 HP Direct Drive Owner’s Manual
12
IX. Accessories
Dust Bin Options -
(May require Custom Mounting Stand.)
1. Hoppers -
Large capacity hoppers from .5 cu. yd. to 3 cu. yd.
3/16” reinforcing angle for added support - 3/16” plate body is 100% continuously
MIG welded on inside - 3/8” rear cross brace angle (not 3/16”) - three 3” base
channel - All angles are structural not formed.
Supplied stand will accomodate up to a 2 yd. hopper w/o modification. Larger
stands available.
2. Air Locks -
Rotary air locks provide an
alternative to an air tight dust bin
for larger volume capacity and
less maintenance.
Magnetic Motor Starters - The 7.5hp Direct Drive dust collectors do not come
wired or with an on/off switch. Because of the voltage and amperage requirements
of the system, an industrial switch must be used.
OAS offers Square “D” Full Voltage Non-Reversing across the Line Starters,
Nema Type 1 Enclosure with Start/Stop in cover, and class 10 overload. Industrial
switches can also be purchased through your local electrician. Due to varying
electrical codes, OAS cannot specify exact wiring requirements. When wiring
the collector you should always hire a licensed electrician.
Bin Level Monitor - AIB000000 - Provides level sensing for dry bulk solids.
The monitor operates by using a 1 rpm synchronous motor to rotate a paddle.
When paddle rotation is impeded by material surrounding it, the motor is de-
energized and triggers a SPDT snap switch. The snap switch can be used in
conjunction with a motor starter to turn equipment off or provide alarm functions.
Bin Level Sensor Assembly w/ Strobe Light
- AXB000000
Pre-assembled package Includes:
- Bin-level sensor, pre-wired to junction box
- Blue strobe light
- Modular cord connections from strobe light to junction box
- Junction box with pigtail wires to connect 110V supply power
3. Cone w/ Clean Out -
Optional cone with clean
out plate for use with
airlocks..