6
O.A.S. 2008
c
5 - 7.5 HP Direct Drive Owners Manual
V. Angle Iron Stand
Stand Hardware:
1. (28) 3/8 x 1 1/4 bolts for Stand Assembly
2. (28) 3/8 flat Washers
3. (28) 3/8 serrated Nuts
4. (4) Vertical Angle Iron Legs
5. (4) Cross Braces
6. (1) Cross Brace w/ Plenum Connection
7. Square Cross Brace - A.) Front B.) Back
Requires Fork Truck for installation.
1. Bolt stand together laying down.
Orient square cross brace (7).
Cross brace (6) must be oriented
to face plenum.
Note: There will be NO lower
brace on front so drum or
hopper can be moved.
2. Stand must be set on a
stable base capable of
supporting fan blower /
cyclone / stand / dust bins
when full.
3. Anchor stand in place
with appropriate fasteners.
(Fasteners not provided.)
4
4
4
4
6
5
5
5
5
7
A
B
Wall Bracket
installation
instructions are
on pg.9.
