Oneida Air Systems XXK050100, Руководство пользователя

Страница: 4 / 21

O.A.S. 2008
c 5 - 7.5 HP Direct Drive Owner’s Manual
3
II. General Assembly
1
5
5
5
2
3
9b
9e
9b
9c
(12) 5/16” x 1” Bolts
(12) 5/16” Washers
(12) 5/16” Nuts
(4) 3/8” x 1” Bolts
(4) 3/8” Washers
(4) 3/8” Nuts
Caution
Check Dust Bin Frequently For
Smoldering Materials. Empty Bin Before
Leaving Shop.
Drum cover must be in place when system
is operating to prevent motor overheating!
An airtight seal between the cyclone and
drum will provide the necessary resistance
needed to prevent motor overheating!
Caution
Caution:
If exhaust air is vented outside you must provide
make up/return air.
Flue gases (carbon monoxide) can be drawn into
the shop from furnaces, water heaters or other
appliances.
To avoid personal injury or property damage, read owner’s manual thoroughly before
installing and operating system. (Read section on collector location and fire hazards.)
This collector is for use with WOOD DUST ONLY!
Keep fire extinguishers handy at all times.
Do not use this product to collect other types of dusts or fumes.
(Fire or explosion may occur!)
Do not introduce sparks or sources of ignition into collector.
Personnel should stay at least 20 ft. away from operating system. (Deflagration Hazard)
Empty and check dust bin frequently for possible smoldering materials.
Rotating blades inside. Keep hands and objects away.
Do not operate system unless COMPLETELY assembled with dustbin.
(Personal injury or motor damage may occur!)
Consult local fire marshal before installing.
Follow all Federal, State, Local and NFPA codes when installing system.
To reduce the risk of injury from moving parts - unplug before servicing.
To reduce the risk of electric shock - unplug before cleaning or servicing.
Read Before Installing and Operating!
For All
Systems
Caution
(8) 5/16” Washers
(8) 5/16” Nuts
Filter Maintenance
Failure to follow filter maintenance instructions
in owner’s manual will cause filter to be
damaged.
Blow down filter at end of day with compressed
air per owner’s manual or blow down when back
pressure reaches 3” water gauge - whichever
comes first. Never allow gauge to reach 5”.
- XXK050100 - 1 phase - XXK070300- 3 phase
9a
0
1 2 3 4
5
INCHES W.C.
8a 8b
8c
8e
8d
7.5 hp Direct Drive System - XXK070300 3 phase
1. Motor/Blower Assembly BXI050100-1ph -BXI070300 - 3ph
1a.Motor -1 ph / BMZ070370-7.5 hp 3 phase 3 ph
1b.Fan Housing5 & 7.5 hp 16” - BHX070000
1c.Fan Wheel - BWX160000
1d.7.5 hp Shaft Spacer - BBS070001
1e.Bolt 5/16” - 24x1” Left Thread - AFB155160
1f. Motor Plate - RMP000000
1g. 5/16” Washer - AFW155160
1h. Bolt 1/2”-13x3/4” HH (4) - AFB155200
1j. Fender Washer 5/16” x 1 1/2” (2) - AFW170000
1k. Washer Flat 3/8” (8) - AFW190000
1l. Whiz Lock Nut 3/8” GR5 (4) - AFT000004
1m. Bolts 3/8” - 16x1” HHGR% (4) - AFS015100
2. Cyclone Barrel - SXI070000
3. Cyclone Cone 5-7.5 HP 27” - SCX070000
4. Bolts 3/8” 16x1” (16) - AFS015100
Washers 3/8” (32) - AFW190000
3/8” Wiz Lock Nuts (16) - AFT000004
5/16” Wiz Lock Nuts (16) - AFT155175
5. Neoprene Gasket (30’) - RGZ000000
6. Owners Manual - ZBM000006
7. Plenum Filter Assembly - FXK020100
7a. Plenum Assembly 2 Filters 5-7.5 hp DD - FPX020700
7b. Dust Bin 16” Dia. x 12” high (2) - FPZ016000
7c. Filter Cartrigde 130 sq. ft. 18”dia. x 62” L (2) - FCS186200
7d. Internal Silencer - BSC180000
8. Filter Efficiency Gauge Kit - FXK000000
8a.Filter Efficiency Gauge 0”-5” H20 - VRG001005
8b. Vinyl Tubing Clear 5/16” O.D. - VRV003125 (8’)
8c. Static Pressure Tip - VRP001875
8d. Mounting Flange for Pitot Tube - VRP010000
8e. Filter Efficiency Gauge Bracket - FXX000000
9. 55 Gal. Steel Drum Kit - SEK551001
Standard
9a. Drum Lid w/ 10” Ring - SEX551000
9b. Hose Clamps (2) - ACB120000
9c. 55 Gal. Steel Drum - SES550000
9e. Flex Hose (10” dia. x 1’) - DHF100000
10. Stand Standard with Plenum Support - STZ070000
Hardware for stand
10a. (38) 3/8” 16 x 1” Bolts - AFS015100
10b. (38) 3/8” Flat Washers - AFW190000
10c. (38) 3/8” Wiz Lock Nuts - AFT000004
11. Decal - (1) Oneida Logo - ZBC000015
12. Labels
12a. Rotation Label - ZBC000029
12b. Caution / Exhaust Label - ZBS000004
12c. General Caution Label - ZBS000001
12d. Filter Maintenance Label - ZBS000007
12e. Caution / Check Frequently Label - ZBS000006
12f. Caution / Drum Cover Label - ZBS000005
7
7d
7a
7b
5 & 7.5 HP
Direct Drive Cyclonic
Dust Collectors
Oneida Air Systems, Inc. 1001 West Fayette St., Syracuse, N.Y. 13204
Phone 1-800-732-4065 315-476-5151 Fax 315-476-5044 www.oneida-air.com
Owner’s Manual
6