Oneida Air Systems XXK050100, Руководство пользователя

Страница: 12 / 21

O.A.S. 2008
c
5 - 7.5 HP Direct Drive Owner’s Manual
11
VIII. Single and Three Phase Wire Diagram
Use wiring diagram on motor plate if different from below.
- Electrically insulate all connections.
- For counter-clockwise rotation, looking from top of motor down.
5hp Single Phase
Baldor Motor / 230v / 19.5 amps / TEFC / C Face / 3450 rpm
7.5hp Three Phase
Baldor Motor / 208 - 230/460v / 19 - 17/8.6 amps / TEFC / C Face /
3450 rpm
L1
L2
L3
4
5
6
Tie together
Wiring should always be done by a licensed electrician!
Ground: Connect house ground
wire to green chassis screw in
motor wire housing box.
Motor
Wire
Box
Green
Chassis
Screw
Top View
Outlet
Inlet
1 - Blue
8 - Red
J - Brown
5 - Black
Power Line 1*
Tie together and insulate with
a wire nut (do NOT connect
to any house wiring)
* Power Line 1 and 2 are interchangeable
208 / 230 Volts
1 & 7
2 & 8
3 & 9
L1
L2
L3
7 & 4
8 & 5
9 & 6
Tie together
460 Volts
1
2
3
Tie together
Tie together
To reverse rotation interchange any two line leads
Check rotation after wiring.
Wire for counter-clockwise rotation.
4 - Yellow
Power Line 2*
Note: This Dust Collector is
pre-wired at the factory and
need only be plugged into a
NEMA 6020R dedicated
electrical receptacle. 5hp
single phase only.