Grizzly H2935 Скачать руководство пользователя

Страница: 1 / 37

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#JH18255 PRINTED IN TAIWAN

13V3

Revised H2935 Motor

REF PART #

DESCRIPTION

13V3 PH2935013V3 MOTOR 1/3HP 120V 1-PH V3.06.16

Revised H2936 Motor

13V3

The following change was recently made to these machines since the owner's manual was printed:

•

Motor has changed.

Aside from this information, all other content in the owner's manual applies and MUST be read and under-
stood for your own safety.

IMPORTANT: Keep this update with the owner's manual for future reference.

For questions or help, contact our Tech Support at (570) 546-9663 or [email protected].

READ THIS FIRST

For questions or help with this product contact Tech Support at (570) 546-9663 or [email protected]

Model H2935 & H2936

***IMPORTANT UPDATE***

For Machines Mfd. Since 06/16

and Owner's Manual Revised 01/12

REF PART #

DESCRIPTION

13V3 PH2936013V3 MOTOR 1/2HP 120V 1-PH V3.06.16

Содержание H2935






































Результаты поиска

Содержание H2935

Отзывы:

Похожие инструкции для H2935

Бренды по названию

Популярные бренды

Grizzly H2935, Руководство пользователя

Результаты поиска

Содержание H2935

Отзывы:

Похожие инструкции для H2935

Бренды по названию

Популярные бренды