Oneida Air Systems Supercell XSK000014, Руководство пользователя

Страница: 18 / 32

Either Hole
Oneida Air Systems, Inc. 16
Assembly Instructions (Continued)
THE MOTOR ASSEMBLY IS HEAVY AND CUMBERSOME; BE SURE TO HAVE ADEQUATE HELP WHEN LIFTING!
21
Carefully lift the Motor Assembly (A) up
and over the Filter (C) and down onto the
Cyclone's (E) upper flange. Align the Motor
Assembly so its perimeter is flush with the
Cyclone's (E) flange below it [FIG. 21].
Note: The Motor Assembly can be freely rotated
to best position the Magnetic Starter and Pulse
Bar to suit your needs. Some positions will not
work as these items may impact with the wall.
22
Lift and close the Ring Clamp (D) over the
Barrel Gasket (G2) and the Cyclone's (E)
upper flange.
Secure the Ring Clamp (D) using the Clamp's
cotter pin [FIG. 22].
23
Take the Vinyl Tubing (G18) and route it
through the closest retaining hole located in
the back corner of the Wall Bracket (F) [FIG.
23].
Note: Which hole you use will be determined
by the orientation of your Motor Assembly (A).
Use whichever hole is closest to ensure adequate
length for the Vinyl Tubing (G18) to connect to
the Drum (J1).
G18
F
E
A
C
G18
FIG. 21
FIG. 22
FIG. 23
Pulse Bar
Magnetic
Starter