Oneida Air Systems Supercell XSK000014, Руководство пользователя

Страница: 14 / 32

Oneida Air Systems, Inc. 12
Assembly Instructions (Continued)
Inlet
Facing
Right
Inlet
Facing
Forward
Inlet
Facing
Left
W
all
FIG. 13
G10
G9
G12
G13
E
G8
G7
W
all
FIG. 12
E
G13
FIG. 11
11
The Cyclone (E) can be rotated so that the inlet
is facing parallel or perpendicular to the wall.
Decide how you want your system oriented
[FIG. 11].
Note: The cone’s inlet can be rotated in
90-degree increments to best connect to your
ductwork and/or tools. Other positions will not
work as they will hinder installation of the Rear
Support Brace.
12
Align the Rear Support Brace (G13)
underneath the hole closest to the wall on the
upper flange of the Cyclone (E) [FIG. 12].
13
Secure the Rear Support Brace (G13) to the
Cyclone (E) using a 2-1/2" Hex Head Bolt
(G7), Flat Washer (G8), Nylon Spacer (G12),
Rubber Washer (G9), and Whiz-Lock Nut
(G10) as shown in [FIG. 13].
Note: Ensure that the Whiz-Lock Nuts are
torqued down so that the rubber washers are
firmly compressed - this will prevent air leaks.