OneAccess Crocus CNV, Руководство пользователя и справочник

Страница: 103 / 168

Crocus CNV Configuration attributes
Reference manual 93
6.5 Management configuration attributes
crocusIfConv<2m/Nx64><Tt/Cv>/management/cms2Address default: 0
If you want to connect to a Crocus CNV with TMA, you have to specify the address of the Crocus CNV.
Refer to Section
4.2 - Connecting to a Crocus CNV with TMA .
There are two different types of addresses:
Address type Description
relative This type of addressing is meant for a network topology where the devices are
connected
in-line on management level. I.e. with extended management links
(1)
between two devices. Refer to the figure below : Relative addressing.
To enable relative addressing, no address has to be specified in the device.
(1)
An extended management link is realised with a crossed cable between the
auxiliary connectors of the two devices. You also have to set the console attribute to
the value
management
.
absolute This type of addressing is meant for a network topology where the devices are not
connected
in-line on management level. I.e. when there is a digital multipoint device
present (e.g. the Orchid DM). Refer to the figure below : Absolute addressing.
To enable absolute addressing, an address has to be specified in the device. This
is done with the attribute
cms2Address . The absolute addressing range goes from 0
up to 65535 .
Relative addressing
Absolute addressing
PC running
TMA
extended
link
relative 0
relative 1
relative 2
relative 3
PC running
TMA example:
absolute 0
example:
absolute 1
digital
multipoint
example:
absolute 10
example:
absolute 20
example:
absolute 30