One World Touch MP1200, Руководство по обслуживанию

Страница: 50 / 110

Service Manual version 1008
MP1200/MP1500 (PC920 Intel 945G)
5-42
(1)
(2) IMS 2*2.5 (2)
(3)
(3)
(4)
IMS 2*2.5 (2)
(5)
IMS 2*6 (2)
(6)
FMS M3*5 (2)
(7)
5.2.5. FDD/CD-ROM Assembly
The following steps show the ways to install an internal CD-ROM or DVD-ROM and floppy disk drive.
1. Attach the CD-ROM board (1) to the slim CD-ROM (2) and fix them together with two TMS 2*8
screws to make a CD-ROM module (3).
2. Insert the CD-ROM module (3) to the CD-R/FDD bracket (4) and fix them together with two IMS
M2*2.25 screws.
3. There is a 40-pin CD-ROM ribbon cable (7). Connect one end to the CD-ROM board.
4. Attach one end of the 26-pin FDD flat cable to the slim floppy disk drive (5) first.
5. Insert the FDD module to the right side of the CD-R/FDD bracket and fix them together with
two IMS 2*6 screws.
6. There is a small metal bracket (6) taped with foam sponge used to firmly fix the CD-ROM and FDD
modules to the CD-R/FDD bracket. Retain this bracket to the device bracket with two FMS M3*5
screws. This small bracket is to prevent the CD-R/FDD from moving when installed to the
FDD/CD-ROM bracket.