One World Touch MP1200, Руководство по обслуживанию

Страница: 20 / 110

Service Manual version 1008
MP1200/MP1500 (PC920 Intel 945G)
2-12
2.5. Powering up the System
Upon receipt of the MP1200/MP1500, the system should have been properly set up and
configured by your dealer.
To power up the system, follow the procedures below.
1. Find the 90
o
power cord from the accessory box. Connect
the 3-pin female end of the power cord to the AC inlet
located at the right rear lower side of the panel PC. Plug
the 3-pin male end to an AC power socket.
2. If there are any other peripheral devices connected to the
system, make sure all the device cables are properly
retained and connected to the panel I/O ports.
3. Power on the external peripheral devices first.
4. When facing the system, from your point of view, the power switch is at the right rear lower
side of the panel PC. Press the power switch.