One World Touch MP1200, Руководство по обслуживанию

Страница: 101 / 110

Service Manual version 1008
MP1200/MP1500 (PC920 Intel 945G)
7-93
7.4.7. PnP/PCI Configuration
Selecting PnP/PCI Configuration on the main menu displays the following menu.

Init Display First
This item allows you to decide to active which Display controller first by PCI slot or Onboard.
The options are PCI Slot or Onboard

Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset Extended System Configuration Data
(ESCD) when you exit Setup if you have installed a new add-on and the system reconfiguration has
caused such a serious conflict that the operating system can not boot.
The options are Enabled or Disabled.

Resource controlled by
The Award Plug and Play BIOS has the capacity to automatically configure the boot and Plug and Play
compatible devices.
However, this capability means absolutely nothing unless you are using a Plug and Play operating
system such as Windows  95. If you set this field to “manual” choose specific resources by going into
each of the sub menu that follows this field (a sub menu is preceded by a “  ”).
The options are Auto (ESCD), Manual.

IRQ Resources
When resources are controlled manually, assign each system interrupt a type, depending on the type
of device using the interrupt.
IRQ3/4/5/7/9/10/11/12/14/15 assigned to
This item allows you to determine the IRQ assigned to the ISA bus and is not available to any PCI slot.
Legacy ISA is for devices compliant with the original PC AT bus specification. PCI/ISA PnP is for
devices compliant with the Plug and Play standard whether designed for PCI or ISA bus architecture.
The options are PCI Device or Reserved.

PCI/VGA Palette Snoop
This option is only useful if you use an MPEG card or an add-on card that makes use of the graphics
card's Feature Connector. It corrects incorrect colour reproduction by "snooping" into the graphics
card's framebuffer memory and modifying (synchronizing) the information delivered from the
graphics card's Feature Connector to the MPEG or add-on card. It will also solve the problem of display
inversion to a black screen after using the MPEG card.
Phoenix – AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
Init Display First [PCI Slot] Item Help
Reset Configuration Data [Disabled] Menu Level

Resource controlled by [Auto(ESCD)]
X IRQ Resources [Press Enter]
PCI/VGA Palette Snoop [Disabled]
↑ ↓ → Move Enter ： /-/PU/PD ： Value F10 ： Save ESC ： Exit F1 ： General
Help