Page 11
For technical questions, please call 1-800-444-3353.
Item 69893
Corner Post Installation Instructions
1. There are 4 Corner Posts (7) to be
attached
to the Floor Plates (1–6).
The end with 2 holes should be at the
bottom, as shown in the illustration
in the center of this page.
2. Attach one Corner Post (7) on the
outside of the right rear Floor Plates (3,
6) using 2 Normal Bolts (65), 2
Hold-down Connectors (47), and 2
Nuts (67), see inset - facing page.
3.
49
66
65
78
67
67
67
7
31
79
80
(Rear)
(Right)
(View from inside greenhouse.)
Fasten a Corner Bracket (49) to
the top of the Corner Post (7) over
the Rear Floor Plate (6) using one
Normal Bolt (65) for now. Install it
angled up towards the center of the
greenhouse, as shown above.
4. Install a Double Brace Bolt (78)
through the bottom hole of the Corner
Bracket (78). Place a Rear Brace (31)
over it with the arrow pointing towards
the Bolt. Also place Front/Rear
Diagonal Strut (79) over the Bolt, and
thread on Nut (67) hand-tight.
5. Fasten a Side Diagonal Strut (80) to
the free top hole on the Corner Post (7)
using Brace Bolt (66) and Nut (67).
6. Fasten Struts (79, 80) to Floor Plates
using Brace Bolts (66), Hold-down
Connectors (47), and Nuts (67),
see inset on facing page. Allow
Rear Braces (31) to hang free.
7. Repeat steps 2 through 6 for the left
rear Corner Post (7) on the left side.
Keep in mind that the connections will
be reversed compared to the right side.
8. Attach one Corner Post (7) on the
outside of the front left Floor Plates (1a,
3) using 2 Normal Bolts (65), 2 Hold-
down Connectors (47), and 2 Nuts (67).
9.
49
66
66
67
67
7
79
80
(Front)
(Left)
(View from inside greenhouse.)
Insert a Brace Bolt (66) through the
second hole from the top of the Corner
Post (7) over the Front Floor Plate (1a).
Place the bottom hole of the Corner
Bracket (49) over the Bolt with it angled up
towards the center of the greenhouse, as
shown above. Secure it using a Nut (67).
10. Fasten a Side Diagonal Strut (80) to
the top hole on the Corner Post (7)
over the Side Floor Plate using a
Brace Bolt (66) and Nut (67).
11. Secure the Struts (79, 80) to the
Floor Plates using Brace Bolts (66),
Hold-down Connectors (47), and
Nuts (67), see inset on facing page.
12. Repeat steps 8 through 11 for the right
front Corner Post (7) on the right side.
Keep in mind that the connections will
be reversed compared to the left side.
BOTTOM
TOP
Corner Post
(7)
Содержание 69893
Страница 1: ......
