background image

Page 19

For technical questions, please call 1-800-444-3353.

Item 69893 

        

Brace Installation Instructions

Note:

  

Brace 

 

(30 - 32)

Strut

 (79, 80)

Post

 (14, 16, 17)

Corner Post

 (7)

All Braces are installed inside the Posts, 

but outside the Struts.  See diagram above, 

shown from inside the greenhouse facing out.

1. 

to (left) 

Corner 

Post (7)

(Outside greenhouse)

(Doorway)

(Inside greenhouse)

to (right) 

Corner 

Post (7)

29

28

(View from above.)

Using a Normal Bolt (65) at top and the 

Brace Bolt (66) already in place at the 

bottom for each, attach the Left and Right 

Doorway Posts (28, 29) to the outside of 

the Front Floor Plates (1a, 2a) and to the 

inside of the Front Ceiling Plates (24, 25).  

Install the Posts with the cut-outs at top and 

oriented as shown in the illustration above.

2.  Using Brace Bolts (66), connect 

the Front Braces (32) between 

the Corner Posts (7) and the 

Doorway Posts (28, 29).  Install Braces 

inside Posts but outside Struts, as shown 

in the diagram at the top of this page.

Note:

  Install the Braces on the walls so 

that they are level.  If the frame is level 

and all Braces are level, the Braces 

should not interfere with one another.
3.  Connect the 4 remaining Rear Braces (31) 

onto the rear wall as shown on the facing 

page, with the arrows pointing towards 

the Corner Posts (7).  Secure in place 

using Brace Bolts (66) at the Corner 

Post and the inserted Brace Bolts in the 

remaining holes.  Install Braces inside 

Posts but outside Struts, as shown in 

the diagram at the top of this page.

4.  Connect 4 Side Braces (30) onto each 

side wall as shown on the facing page, 

with the arrows pointing towards the 

Corner Posts (7).  Secure in place 

using Brace Bolts (66) at the Corner 

Post and the inserted Brace Bolts in the 

remaining holes.  Install Braces inside 

Posts but outside Struts, as shown in 

the diagram at the top of this page.

5.  Place the Gutter End Caps (73) onto the 

ends of the Side Ceiling Plates (12, 13) 

oriented with a gap in the bottom to 

allow water to drain out of the gutters.

Содержание 69893

































Отзывы: