One for All URC-8820 B00, Руководство пользователя

Страница: 10 / 33

O
WNER
’
S
M
ANUAL
Checking the Codes 9
at all, try searching for your code. For
example, to search for a code for your TV:
1. Turn on your TV and on the remote
control, press
TV
once.
2. Press and hold
SET
until the LED (red
light) blinks twice, then release
SET
.
3. Enter
9 9 1
. The LED will blink twice.
4. Select a test function from the list
below or use the default test function
(
POWER
) and skip step 4.
NOTE:
The keys that can be used for the test
function are
0
,
1
,
2
,
3
,
POWER
,
VOL +
,
Play
,
Stop
and
Mute
.
5. Press
CH+
to begin searching for your
code. Stop the search when the device
turns off or performs the function
selected in step 4 (if other than
POWER
).
NOTE:
In the search mode, the remote control
will send IR codes from its library to the
selected device, starting with the most
popular code first. Every press of
CH+
will
send a new code. If you go past the code that
performed the Test Function, you can go back
by pressing
CH-
.
6. To lock in the code, press and release
the
SET
key. The LED blinks twice.
7. To search for the codes of your other
devices, repeat steps 1 through 6, but
substitute the appropriate device key
for the device you are searching for in
step 1.
CHECKING THE CODES
If you have set up the remote control using
the
Searching For Your Code procedure, you
may need to find out which four-digit code
is operating your equipment. For example,
to find out which code is operating your TV:
1. On the remote control, press
TV
once.
2. Press and hold
SET
until the LED (red
light) blinks twice, then release
SET
.
3. Enter
9 9 0
. The LED will blink twice.
4. To view the code for the first digit,
press
1
once. Wait 3 seconds, count the
LED blinks (e.g., three blinks =
3
) and
write down the number in the leftmost
box in the
TV
code boxes on page 7.
NOTE:
If a code digit is
0
, the LED will not
blink.
5. Repeat step 4 three more times for
remaining digits. Use
2
for the second
digit,
3
for the third digit, and
4
for the
fourth digit. Write down the code
digits in the remaining TV code boxes
on page 7.
6. To check for codes of other devices,
repeat steps 1 through 5, but substitute
the appropriate device key for each
device you are checking. Write down
the device’s code digits in the
appropriate code boxes on page 7.
USING MACROS
You can program the
M1
and
M2
keys on
your One For All 8L Universal Remote
Control with Learning (URC-8820 B00) to
perform repetitive, time-consuming
operations for easy, convenient access
through the press of a single key.
Macro keys are ideal for home theater
operations, setting a favorite channel, guide
steps, or other multiple functions you would
like to control with one key press. Moreover,
each macro key can hold up to a total of 20
key presses.
NOTE:
Programming a new macro over an
existing one will erase the original macro.
OFA 8L with Learning Owners Manual.fm Page 9 Monday, January 24, 2005 10:04 AM