O
WNER
’
S
M
ANUAL
Re-assigning Device Keys 13
high frequency ones, and other
unusual formats.
•
For optimum learning, avoid high
levels of ambient light such as natural
sunlight or energy-efficient fluorescent
lights.
NOTE:
Please have your original remote
controls handy before programming learning.
Be sure to press each teaching key within 5
seconds of the previous entry. Otherwise, the
One For All 8L Universal Remote Control
with Learning (URC-8820 B00) exits the
learning mode.
P
ROGRAMMING
A
L
EARNING
K
EY
1.
Press and hold
SET
until the LED (red
light) blinks twice, then release
SET
.
2.
Enter
9 7 5
. The LED will blink twice.
3.
Press a device key once (e.g.,
TV
) to
assign a mode for learning.
4.
Press the desired key once (e.g.,
+100
)
to store a feature to be learned. The
LED will turn on and remain on for 5
seconds. If the LED does not turn on,
go back to step 1 and start again.
5.
Place your original remote control
(e.g., TV remote control) head-to-head
(about 2" apart) from the One For All
8L Universal Remote Control with
Learning (URC-8820 B00).
6.
On your original remote control, press
and hold the key (i.e., feature) to be
learned until the LED on the One For
All 8L Universal Remote Control with
Learning (URC-8820 B00) turns off
and then blinks twice. If the LED does
not blink twice, repeat steps 3 through
6.
7.
To learn functions onto other learning
keys (e.g.,
M1
and
M2
), repeat steps 3
through 6.
8.
To lock in new feature(s) on the One
For All 8L Universal Remote Control
with Learning (URC-8820 B00), press
and hold
SET
until the LED blinks
twice, then release
SET
.
9.
To test a learned feature, press a device
key (e.g.,
TV
) once where the learning
mode was assigned. Then press the
learning key (e.g.,
+100
) where the
learned feature is stored.
D
ELETING
F
UNCTIONS
FROM
THE
L
EARNING
K
EYS
1.
Press and hold
SET
until the LED (red
light) blinks twice, then release
SET
.
2.
Enter
9 7 6
. The LED will blink twice.
3.
Press the device key once where the
learned feature is stored (e.g.,
TV
).
4.
Press the learning key (e.g.,
+100
) to
be deleted twice. The LED will blink
twice after the second press.
5.
To clear additional functions stored on
other learning keys, repeat steps 1
through 4 (in this section).
RE-ASSIGNING DEVICE
KEYS
You can set the One For All 8L Universal
Remote Control with Learning (URC-8820
B00) to control a second TV, VCR, DVD
player, or other device. For example, to
control a TV, a cable box, and two DVDs,
you will need to re-assign the unused
AUX
key to operate the second DVD as follows:
1.
On the remote control, press and hold
SET
until the LED (red light) blinks
twice, then release
SET
.
2.
Enter
9 9 2
. The LED will blink twice.
3.
Press
DVD
once, then press
AUX
once.
OFA 8L with Learning Owners Manual.fm Page 13 Monday, January 24, 2005 10:04 AM
