O
WNER
’
S
M
ANUAL
Troubleshooting 17
TROUBLESHOOTING
PROBLEM:
LED (red light) does not
blink when you press a
key.
SOLUTION:
Replace batteries with two
new AAA alkaline
batteries.
PROBLEM:
LED (red light) blinks five
times after you press a key.
SOLUTION:
Replace batteries with two
new AAA alkaline
batteries.
PROBLEM:
LED blinks when you
press a key, but home
entertainment device does
not respond.
SOLUTION:
Make sure the remote
control is aimed at your
home entertainment
device and is not farther
than 15 feet away.
PROBLEM:
The unit does not control
home entertainment
devices or commands are
not working properly.
SOLUTION:
Try all listed codes for the
device brands being set
up. Make sure they can be
operated with an infrared
remote control.
PROBLEM:
TV/VCR Combo does not
respond properly.
SOLUTION:
Use the
VCR
codes for your
brand. Some combo units
may require both a
TV
code
and a
VCR
code for full
operation.
PROBLEM:
Changing channels does
not work properly.
SOLUTION:
If the original remote
control required pressing
ENTER
to change channels,
then press
ENTER
on the
remote control after
entering the channel
number.
PROBLEM:
During learning, LED
emits a long blink after
pressing and holding key
to be learned.
SOLUTION:
Memory is full or a bad
capture has occurred.
Avoid high-ambient light
sources, such as direct
daylight and fluorescent
bulbs. Try readjusting
positions of remote
controls before performing
the procedure again.
PROBLEM:
Tried
Searching For Your
Code
method and still
could not find a working
code.
SOLUTION:
Clear the device key as
follows: Press and hold
SET
until the LED (red light)
blinks twice, then
release.Next enter
9 9 2
.
Then press the device key
to be cleared twice.Now
repeat the
Searching for
Your Code
method on page
8.
PROBLEM:
CH+
and
CH-
do not work
for your RCA TV.
OFA 8L with Learning Owners Manual.fm Page 17 Monday, January 24, 2005 10:04 AM
