301 Fulling Mill Road, Suite G ©Copyright 2004 by OnQ Technologies,
Middletown, PA 17057
Inc All Rights Reserved.
(800)-321-2343
www.onqhome.com
Innovations in Home Living.
If unsuccessful (Request timeout), you may have trouble
connecting to your ISP, please verify that the product is
properly conigured to connect to your ISP. Also verify that
your Cable/DSL modem and the line are functioning.
To insure you have access to the Internet, PING an IP address
or domain name on Internet.
For example, at the command prompt enter
C:\> PING
168.95.192.1 –w 5000 or
C:\> PING www.yahoo.com –w 5000
If successful, you are connected to the Internet.
If you can ping the ISP’s gateway, but cannot ping a specific site
(e.g. www.yahoo.com) on the Internet, chances are, your ISP
has an internal problem (DNS server not available).
26
301 Fulling Mill Road, Suite G ©Copyright 2004 by OnQ Technologies,
Middletown, PA 17057
Inc All Rights Reserved.
(800)-321-2343
www.onqhome.com
Innovations in Home Living.
FCC Certifications
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio or TV communications. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the On-Q Home 4 Port Router/Switch off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the affected receiving radio or TV antenna.
•
Increase the separation between the Router/Switch and affected device.
•
Connect the Router/Switch into an outlet on a circuit different from that to
which the affected equipment is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cables must be used in order to comply with emission limits.
You are cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
All trademarks and brand names are the property of their respective proprietors.
Specifications are subject to change without prior notification.
iii
