OMS KEA 300 TGI, Руководство по эксплуатации и обслуживанию

Страница: 32 / 36

32
Excessive resistance to
product cutting.
Blade not sharp
enough.
Sharpen the blade.
Disjointed slices.
Blade not sharp
enough.
Sharpen the blade.
Damaged blade.
Contact the authorised
service provider to replace
the blade.
PROBLEM PROBABLE CAUSE SOLUTION
Blade not sufficiently
sharpened.
Dirty wheels. Clean the wheels.
Worn wheels.
Contact the authorised
service provider to replace
the wheels.
Blade worn more than
permitted (-10 mm
from the original
diameter).
Contact the authorised
service provider to replace
the blade.
Irregular sliding of the
product holder tray or
the additional sliding
tray.
Insufficient lubrication
on the sliding guides.
Lubricate.
Damaged self-
lubricating rollers,
bearings and
bushings.
Contact the authorised
service provider to replace
them.
Difficult to detach the
product holder tray at
the end of the run from
the operator side with
the thickness gauge
control dial in the zero
position, or to detach it
outside this position.
Mechanical safety
interlock system
component worn.
Contact the authorised
service provider.
The cold meat pusher
arm does not lock.
Kinematic motion
elements worn.
Contact the authorised
service provider.