OMS KEA 300 TGI, Руководство по эксплуатации и обслуживанию

Страница: 21 / 36

21
5.2 OPERATION
5.2.1 MANUAL OPERATION
1. Release the carriage by turning the selector (8) to the manual position (A).
2. Press the start blade button (4) and check that the carriage slides manually.
At the end of the machine operation, press the stop blade button (6/a) (Fig.
8).
5.2.2 COMPLETE AUTOMATIC OPERATION
First of all, with the machine off, turn the carriage lock selector (8) to the
automatic position (B).
1. Press the AUT/MAN button on the slice counter selector (2). The Led AUT
goes on.
2. The display will come one, which will make it possible to use the keys (7/b -
from right: units, tens, hundreds) to set the number of slices that the machine
has to slice.
3. Press the start blade (4) and start carriage (5) buttons.
4. During automatic slicing machine operation, the display (3) will show the
number of slices cut in real time and the carriage will stop as soon as the set
quantity has been reached.
5. At this point, press the stop button blade (6/a).
6. In order to vary the length of the carriage run, use the (1) keys, thereby
optimising cutting times.
5.2.3 SEMIAUTOMATIC OPERATION
First of all, with the machine off, turn the carriage lock selector (8) to the
automatic position (B).
1. Press the manual key (M) on the slice counter selector (2)
2. Press the start blade (4) and start carriage (5) buttons. At this point, the
slicing machine will continue to slice until the stop carriage key (6 / b) is
pressed, stopping the run completely.
3. Press the stop blade button (6/a) to stop slicing machine operation
completely.
4. In order to vary the length of the carriage run, use the +/- keys, thereby
optimising cutting times.