![background image](http://html1.mh-extra.com/html/omron/v720-series/v720-series_operation-manual_1633447050.webp)
Wiring
Section 4-4
4-14
4-5-2
Wiring RESET Signal and External Input Signal
I/O Solderless Terminal
The I/O terminals use M3 set screws. The following type of solderless
terminal can be connected to these terminals.
M3
6.5 max.
Tighten each screw to a torque of approximately 6 kgf
•
cm.
Note
1.Make sure that the input voltage does not exceed a maximum
permissible input voltage of 26.4 V, otherwise the Controller may
malfunction.
2.Separate power lines and high-tension lines from the input line in order
to protect the input line from noise interference.
RESET
input
24 VDC
2
IN2
input
24 VDC
IN1 IN2
2
Содержание V720 Series
Страница 1: ...Cat No S908 E1 2 ID Controller V720 series Electromagnetic Inductive RFID System 9 OPERATION MANUAL...
Страница 3: ...iv...
Страница 5: ...vi...
Страница 9: ...x...