Omron V720 Series Скачать руководство пользователя страница 12

Страница: 12 / 122

Applicable Standards

xiii

Application Precautions

Caution

Be sure to observe the following precautions to ensure safety in installing or
operating the System.

Do not use the System in an environment subject to flammable, explosive,

or corrosive gases.

Do not attempt to take any Units apart, to repair any Units, or to modify any

Units in any way.

Be sure that all the mounting screws, terminal screws, and cable connector

screws are tightened to the torque specified in the relevant manuals.

Use crimp terminals of specified size for wiring.

Be sure that the items with locking devices are properly locked into place

before using the System.

Be sure that the DC Power Supply Unit exclusively designed for the V720

Series is used and is not connected to any other device.

Be sure that the power supply voltage is within the rated range of 24 VDC

+10% and -15%.

Install the ferrite core supplied with the V720-CD1D/CD2D according to the

specified instructions.

Be sure to observe all warnings, cautions, and safety precautions specified

in the manual.

Correct Use

Caution

Do not install the V720-CD1D/CD2D in the following locations:

Locations subject to direct sunlight.

Locations subject to condensation as the result of severe changes in

temperature.

Locations subject to corrosive or flammable gases.

Locations subject to shock or vibration.

Caution

Be sure to observe the following wiring precautions:

Do not wire the lines of the RFID System alongside high–tension or power

lines.

Check the polarity of each terminal and make sure not to make mistakes in

polarity.

Caution

Be sure to observe the following precaution when cleaning the V720-
CD1D/CD2D:

Organic solvents may damage the paint coating on the casing or resin part

of the product. Do not use paint thinner or any other organic solvent to
clean the product.

Applicable Standards

The V720-CD1D/CD2D ID Controller conforms to the following standards:

EC Directives EN55022: 1998

EC Directives EN55024: 1998

Содержание V720 Series



























































































































Результаты поиска

Содержание V720 Series

Отзывы:

Бренды по названию

Популярные бренды

Omron V720 Series, Руководство по эксплуатации

Результаты поиска

Содержание V720 Series

Отзывы:

Бренды по названию

Популярные бренды