14
Section 1
Names
and Fun
ct
io
ns of
Compo
nent
s
RFID System
Operation Manual
Section 1
Product Overview
■
RS-232C Port
The RS-232C port is used for communications with the host device. The port conforms to RS-232C
and can be connected to a computer, programmable controller, or other host device.
■
RS-422/RS-485 Port
The RS-422/RS-485 port is used for communications with the host device. The port conforms to RS-
422/RS-485 and can be connected to a computer, programmable controller, or other host device.
■
USB Port
The USB port can be used to easily connect a computer using a USB cable. The port conforms to USB
1.1.
If the USB port is used to connect to the host device, the connection must be 1:1 regardless of the
setting of pin 9 of SW3.
The USB port is not used for control operations. When constructing a system, always use the RS-232C or RS-422/RS-
485 port.
■
Read/Write Head Connection Port
Connect the Read/Write Head connection port to a V600-series Read/Write Head.
■
Controller Number Switches
The controller number switches are used to set a controller number when more than one ID Controller
is connected to a single host device.
Refer to
Setting the Controller Number Switches (SW1 and SW2)
for more information.
■
Switch Cover
There are two DIP switches located behind the switch cover.
Refer to Setting the DIP Switches (SW3 and SW4) for more information.
Refer to
for more information.
■
Mode Switch
The mode switch changes the ID Controller's operating mode between RUN mode and
MAINTENANCE mode.
Refer to
for more information.
■
Terminating Resistance Switch
The terminating resistance switch connects and disconnects the built-in terminating resistance.
Refer to
Setting the Terminating Resistance
for more information.
Содержание V600 Series
