48
Sec
tion
3
Commun
ic
a
tion
Dat
a
For
mat
V500-R521B2/C2
User’s Manual
Section 3
Function Explanation
Data transfer contents of each reading code type
Setting method p.63
Reading code
Description
UPC-A
You can select whether or not to transfer the head character "0" for
transfer digit number adjustment and check digit C/D. ("0" is the
additional character combining with C/D to adjust the number of digit to
be in accordance with EAN-13.)
0 S X1 X2 X3 X4 X5 X6 X7 X8 X9 X10 C/D
S: Number system character (Automatically decided according to the
combination of each character of X1 to X10.)
UPC-E
You can select whether or not to transfer the head character "0" for
transfer digit number adjustment and check digit C/D. ("0" is the
additional character combining with C/D to adjust the number of digit to
be in accordance with EAN-13.)
0 S X1 X2 X3 X4 X5 X6 C/D
S: Number system character (Automatically decided according to the
combination of each character of X1 to X10.)
EAN
Reading data (8-digit or 13-digit) is transferred as it is.
ITF, STF (2 of 5 bar)
Transfers in the order from the next character of the start code to the
character before the stop code. (Start code and stop code are not
transferred.)
NW-7, CODE39
You can select whether or not to transfer the start code and stop code.
When the start code and stop code is permitted to transfer, you can
select whether the transferred start/stop code of NW-7 is in lower-case
"a/b/c/d" or in upper-case "A/B/C/D".
Transfer start/stop code of CODE39 is "*".
EAN128
Add a control character "C1" (ASCII code 5D, 43, 31) which indicates
EAN 128, at the head of the transfer data. Also, FNC1 character, as a
separating character, is replaced to GS (ASCII code 1DH) character
and transferred.
V500-R521.book 48 ページ ２００８年７月１８日 金曜日 午後１時１分
