![background image](http://html1.mh-extra.com/html/omron/v400-r-series/v400-r-series_manual_741432032.webp)
32
6)
“Trig. Setting” menu
You can configure trigger conditions.
When you select “Trig. Setting”, the following dialog box appears.
①
Select active high or active low for the trigger input signal level.
The following table describes a trigger ON state and a trigger OFF state.
Description of trigger states
Trigger signal level
Trigger ON state
Trigger OFF state
Active high
When TRG and SG are open
When TRG and SG are closed
Active low
When TRG and SG are closed
When TRG and SG are open
②
You can select the appropriate duration of the timer between the moment the trigger signal is
turned on and the moment it is turned off in reading codes via trigger. If the readable time is 0
seconds, the code reader is synchronized with external trigger signals (Trigger On or Trigger
Off).
①
②