33
7)
“I/O Setting” menu
You can configure outputs of input/output devices (sequencer outputs).
When you select “I/O Setting”, the following dialog box appears.
①
Select whether or not to transmit outputs of input/output devices (sequencer outputs).
②
You can select the sequencer output format only when “Signal output” checkbox is selected.
The following tables show the states of the OK and NG signals for each sequencer output
format when a match is detected and when a mismatch is detected.
③
You can select the appropriate one-shot duration only when “Signal output” checkbox is
selected and either of the “One-shot system” radio buttons is selected.
①
③
②
