![background image](http://html1.mh-extra.com/html/omron/v400-r-series/v400-r-series_manual_741432020.webp)
20
5)
“CODE39” menu
You can change the settings of Code 39.
When you select “CODE39”, the following dialog box appears.
①
You can specify whether or not to permit for reading Code 39.
②
You can select whether or not to transfer Start/Stop characters.
③
Select whether to enable or disable the check digit.
④
Select whether or not to transfer a check digit appended to the bar code.
! CAUTION !
The Setup Program recognizes the last digit of bar code data as a check digit regardless of
whether or not a check digit is appended to it. Thus, to read a bar code having no check digits
assigned, select “Transfer C/D”.
⑤
You can specify whether or not to permit for reading 1-digit bar code. Normally you select
“1-digit reading permission”.
①
②
③
④
⑤