Omron SYSMAC CX-Programmer 8.1, Руководство по эксплуатации

Страница: 48 / 154

SFC Programming Example Section 1-4
32
the combo box.
Double-click the left-hand side of the action block, and select
D from the combo
box.
Double-click the timer value and input
3 .
10 Input the transition condition for Step 3.
Right-click the transition after Step 3, and select Edit Transition Condition .
Input gateopenLimit as the transition condition.
11 Input the name for Step 4.
Right-click Step 4, and select Edit Step Name .
Input CloseGate into Step 4.
12 Add an action program to the action in Step 4.
Right-click Step 4, and select Add Action - Existing Action .
Double-click the right-hand side of the action block, and select A_gateClose from
the combo box.
13 Input the transition condition for Step 4.
Right-click the transition after Step 4, and select Edit Transition Condition .
Input gatecloseLimit as the transition condition.
14 Add a jump to Step 1.
Right-click the transition after Step 4, and select Connections - Add Connection .
On the Add Connection dialog, select Initial as the jump destination.
Check the Draw Connection as Jump checkbox and click OK .