Omron SYSMAC CX-Programmer 8.1, Руководство по эксплуатации

Страница: 46 / 154

SFC Programming Example Section 1-4
30
1-4-2 Procedures for Using CX-Programmer
This section describes the programming flow and SFC chart editing procedure using,
as an example, the SFC program for the unattended paid parking lot ticketing system.
SFC Programming Flow
1 Select and right-click a Programs item in the project workspace, and select Insert
Program - SFC from the pop-up menu.
For details, refer to 3-1-2 Creating (Inserting) a New SFC Program .
2 Assigning the SFC program to a task
Select and right-click an SFC program item in the project workspace, and select
Properties from the pop-up menu.
On the General tab of the displayed Program Properties dialog, select a task from
the Task Type list.
For details, refer to 3-1-3 Assigning an SFC Program to a Task .
3 Editing SFC chart
When an SFC program is created, 3 types of SFC elements (initial step, transition,
and step) are registered in the SFC chart editor by default. Define the transition
conditions and actions by adding to these SFC elements.
4 Checking the program
Select and right-click an SFC program item in the project workspace, and select
Compile from the pop-up menu.
For details, refer to 3-4-1 SFC Program Check .
5 Transferring the SFC Program to the PLC
Select Transfer - To PLC from the PLC menu.
For details, refer to 4-2 Transferring Programs from Computer to PLC .