Omron SYSMAC CJ1W-PRM21, Руководство по эксплуатации

Страница: 91 / 190

77
Generic Slave Device DTM
Section 3-4
3-4 Generic Slave Device DTM
Most of the current PROFIBUS-DP slave devices are supplied with a GSD file
in order to allow a configurator to setup a configuration for that particular slave
device. OMRON’s Generic Slave Device DTM is provided to allow integration
of the GSD file based configuration options in to an FDT Container applica-
tion, like CX-Profibus.
The GSD files are stored in a separate sub-directory under CX-Profibus.
Upon updating the Device Catalogue, the Generic Slave Device DTM will
scan this sub-directory and present an entry in the Device Catalogue for each
of the GSD files found.
Upon adding the GSD based slave device to the network, an instance of the
Generic Slave Device DTM will be made in the PC memory, which will read
the GSD file contents. The instance of the Generic Slave Device DTM will pro-
vide the User Interface necessary to make the settings for the associated
slave device.
3-4-1 Configuration User Interface
Opening the configuration
DTM The configuration DTM is opened by
• Selecting the slave DTM entry in the Network Window, and double-click-
ing the left mouse button.
• Selecting the slave DTM in the Network Window, and right-clicking the
mouse. From the context menu, select Configuration.
The slave DTM Configuration User Interface, which is displayed in the CX-
Profibus DTM window is shown below. The figure shows the User interface
for an OMRON CJ1W-PRT21 PROFIBUS-DP Slave Unit. By default the Con-
figuration tab is opened.