Omron SYSMAC CJ1W-PRM21, Руководство по эксплуатации

Страница: 127 / 190

113
Setting up a network
Section 6-2
Using Drag & Drop
1,2,3...
1. Open the Device Catalogue: Either select the View - Device Catalogue
menu option, or press the button in the Tool Bar.
2. Select a device DTM in the Device Catalogue.
3. Left click the mouse and Drag the mouse pointer to the desired location in
the network, i.e. MyProject in the Network View window.
4. Release the mouse button and the device DTM will be added to that loca-
tion.
Note Master DTMs can only be added to the main branch of the Network.
Slave Device DTMs can only be added to Master DTMs. Whether or
not a DTM can be added to the branch is indicated by the cursor:
indicates no addition, indicates that addition is allowed.
Using the Add Device Button
1,2,3... 1. Select the top of the network to which the DTM must be added, i.e. select
MyProject in the Network View.
2. Open the device Catalogue: Either select the View - Device Catalogue
menu option, or press the button in the Tool Bar.
3. Select the device that must be added to the network.
4. Select the Add Device button at the bottom of the Device Catalogue win-
dow. The device DTM is added to the network.
Note If a DTM is selected in the Device Catalogue, which can not be added
to the current location in the network, the Add Device button will be
disabled, which is shown as a grayed out button.
Note When adding Master DTM to the network, it is automatically assigned the
PROFIBUS network address 1. This address can be changed, after opening
the Master DTM.
Example After adding the Master DTM to the Network View, repeat (one of) the proce-
dures as outlined above to add slave DTMs to the Master DTM. In the proce-
dures above, the highest level for adding slave DTMs is the Master DTM.
For the example network, a CJ1W-PRM21 PROFIBUS-DP Master unit has
been added to the network. To complete the example network, add
• A CJ1W-PRT21 PROFIBUS-DP Slave Unit.
• A CPM1A-PRT21 PROFIBUS-DP Slave Unit.
• A F-150-PRT PROFIBUS-DP Vision System.
Note When adding slave DTMs to the Master DTM, they are automatically assigned
their PROFIBUS network addresses, in ascending order, i.e. the first slave is
assigned address 2, the second address 3, etc. The addresses can be
changed in the slave DTM User Interface.