17
2. Installation and connection
(5) Fix the AC input terminal-cover to the console by screws.
2. How to calculate an input current roughly
You can calculate an input current roughly before turning on the UPS.
•
Calculate the total electric energy (VA) of the devices linked to the UPS.
Get volt-ampere (VA) of the devices connected to BU200XR2. You may refer to their rating plate, specification
sheet, and instruction manual. Finally sum the amount of VA
In a case where VA is described as W (watt), perform mathematical calculations; W
÷
0.6 = ___VA.
In a case where VA is described as A (ampere), perform mathematical calculations; A X 100 = ___VA.
•
In the event that resultant total volt-ampere exceeds 1500VA, change the AC Input Cable.
Explanation
When reconnect AC Input Cable to BU200XR2, align "L,N,G" printed on the right side of AC Input Terminal,
which is on the rear side of BU200XR2, with "L,N,G" printed on AC Input Cable.
Screw the terminal-cover
2-4 Connecting a battery unit (BU200XR2)
When connecting "Battery Connecting Cable" included with the battery unit between "Battery Connector" of the
main unit and "Battery Connector" of the battery unit, it may make a spark, however, that is no problem. After
putting "AC Input" plug in, the connection lamp on the front panel of the battery unit will light up.
BU200XR2
MB100XR2
