12
2. Installation and connection
Cautions
(Compulsory (do's))
2. Installation and connection
2-1 Precautions and notes on installation and connection
Precautions and notes on installation and connection are given below. Be sure to read them for correct use.
Unpack and carry the UPS bearing the weight in mind. Place and run the
UPS on a structurally sound base.
●
Toppling and dropping may cause injury.
●
The weight of the UPS
BU100XR2: 19kg
BR200XR2: 12kg (main unit)
MB100XR2: 26kg (add-on battery unit)
MB200XR2: 26kg (battery unit)
Keep packing materials including plastic bags and films out of the reach
of children
●
When children swallow or put their head into the packing material, it may bring about the
danger of suffocation.
Provide secure grounding
●
Earth the ground terminals of the UPS and devices connected to the UPS. (See "2. Installation
and connection" on page 12)
You may receive an electric shock in the event of trouble or power failure.
When both the UPS and devices are not grounded and touch both, you may receive an electric
shock.
●
When you use a 3-pin to 2-pin adaptor for an AC Input Plug, be sure to perform grounding
before putting the AC Input Plug in a wall outlet (commercial power). On the other hand, be
sure to perform disconnecting a grounding terminal after removing the AC Input Plug from a
wall outlet (commercial power).
●
Connect the UPS grounding terminal to a grounded-type wall outlet (commercial power) to
make working the Power Line Surge Protection and the Network Line Surge Protection as
intended.
Plug the UPS in a wall outlet (commercial power) with a current capacity
larger than the maximum input current of the UPS.
●
Otherwise, the power cord may be heated.
●
For the device that requires power equivalent to the current capacity of the UPS or larger,
BU100XR2 feeds 10.2A while BU200XR2 feeds 20A.
Be sure to put the AC Input Plug of the UPS in a wall outlet (commercial
power) of 100VAC (50/60Hz).
●
Putting it in a wall outlet (commercial power) of a different voltage may cause a fire.
●
The UPS may fail.
Be sure to use supplied mounting screws.
●
Other screws rather than supplied screws may cause dropping due to insufficient strength.
When you want to install your UPS horizontally, secure the supplied rubber
seats in the four corners of the underside of the UPS.
●
Toppling and/or dropping may occur and cause injury.
