![background image](http://html1.mh-extra.com/html/omron/nx701-1620/nx701-1620_user-manual_742229083.webp)
3 - 11
3 Configuration Units
NX-series CPU Unit Hardware User’s Manual (W535)
3-3 Po
wer Su
pp
ly Units
3
3-
3-1 Mo
dels and Specifications
3-3
Power Supply Units
This section describes the models and specifications of the Power Supply Units as well as the names
and functions of the parts.
Use an NX7-series Power Supply Unit to supply power to an NX7-series CPU Unit.
3-3-1
Models and Specifications
NX7-series Power Supply Units
Item
Specification
Model
NX-PA9001
NX-PD7001
Dimensions
80 × 100 × 100 mm
(W × H × D)
51 × 100 × 100 mm
(W × H × D)
Weight
570 g
290 g
Power supply voltage
100 to 240 VAC (wide-range), 50/60 Hz
(85 to 264 VAC, 47 to 63 Hz)
24 VDC (20.4 to 28.8 VDC)
Power consumption
150 VA max.
85 W max.
Inrush current
*1
*1. The inrush current may vary depending on the operating condition and other conditions. Therefore, select fuses, breakers,
and external power supply devices that have enough margin in characteristic and capacity, considering the condition un-
der which the devices are used.
At 100 VAC:
20 A
*2
/8 ms max. for cold start at room tempera-
ture
At 200 VAC:
40 A
*2
/8 ms max. for cold start at room tempera-
ture
*2. If the ambient temperature is higher or the Controller is hot-started, the inrush current given in the table may be exceeded
by up to twice the given value because the thermistor element with a low-temperature current control characteristic is not
sufficiently cool.
At 24 VDC:
30 A/2 ms max. for cold start at room tempera-
ture
7 A
*3
/3 s max. for cold start at room temperature
*3. Of the inrush current values, the latter value varies depending on the input voltage and may rise to approx. 8.3 A at 20.4
VDC.
Output capacity
*4
*4. Internal components in the Power Supply Unit will deteriorate or be damaged if the Power Supply Unit is used for an ex-
tended period of time exceeding the power supply output capacity or if the outputs are shorted.
Total: 90 W max.
Total: 70 W max.
Output terminal (ser-
vice supply)
Not provided.
RUN Output
Contact configuration: SPST-NO
Switch capacity: 250 VAC, 2 A (resistive load)
120 VAC, 0.5 A (inductive load), 24 VDC, 2A (resistive load)
Replacement notifica-
tion function
Not provided.
Insulation resistance
20 M
Ω
min. (at 500 VDC)
between AC external and GR terminals
*5
---
*6
Dielectric strength
2,300 VAC 50/60 Hz for 1 min between AC
external and GR terminals
*5 *7
Leakage current: 5 mA max.
---
*6
Содержание NX701-1620
