Omron NX701-1620, Руководство пользователя

Страница: 62 / 168

1 Introduction to NX-series Controllers
1 - 16 NX-series CPU Unit Hardware User’s Manual (W535)
3) Setting the Tasks
Making task settings Configurations
and Setup
− Task
Settings
NJ/NX-series CPU Unit Soft-
ware User’s Manual
(Cat. No.
W501)
Step 2-4
Offline Debugging
Checking the algorithms and task execu-
tion times on the Simulator (virtual control-
ler) NJ/NX-series CPU Unit Soft-
ware User’s Manual
(Cat. No.
W501)
Step 3. Mounting and Setting Hardware
Step Description Reference
1) Mounting
• Connecting adjacent Units
• Mounting to DIN Track 4-3 Mounting Units on page
4-9
2) Setting Hardware
• Setting the node addresses of the EtherCAT slaves Operation manuals for the
EtherCAT slaves
Step 4. Wiring
Step Description Reference
1) Connecting Ethernet
Cable
• Connecting the built-in EtherCAT port
• Connecting the built-in EtherNet/IP port 4-4 Wiring on page 4-31
2) Wiring I/O
• Wiring I/O to EtherCAT slaves Operation manuals for the
EtherCAT slaves
4-4 Wiring on page 4-31
• Checking wiring Sysmac Studio Version 1
Operation Manual
(Cat. No.
W504)
3) Connecting the
Computer That
Runs the Sysmac
Studio
• Connecting the built-in EtherNet/IP port Sysmac Studio Version 1
Operation Manual
(Cat. No.
W504)
Step 5. Checking Operation and Starting Operation on the Actual System
Step Description Sysmac Studio
Operations Reference
1) Online Connection to
Sysmac Studio and
Project Download
Turn ON the power supply to the Control-
ler and place the Sysmac Studio online.
Then, download the project.
*1
Perform this step before you create the
slave configuration or Unit configuration
from the mounted Units in step 2-1.
Controller −
Communications
Setup
−
Controller −
Synchronization
NJ/NX-series CPU Unit Soft-
ware User’s Manual
(Cat. No.
W501)