Omron NT11 - 01-2004, Руководство пользователя

Страница: 112 / 186

99
Menu Screen Function
Section 4-7
4-7 Menu Screen Function
The NT11 has a function whereby screens can be switched even in the
absence of a screen switching instruction from the PLC, by using numeric
keys on the screen. This function is called the menu screen function.
When screen data is created with the support tool, specify “menu screen” as
the screen attribute and assign switching destination screen numbers to
numeric keys 1 through 4.
If one of these numeric keys is pressed during operation, the screen whose
number was assigned to the key will be displayed. At the same time, the
screen number of the destination screen is notified to the PLC.
• Up to four destination screens can be registered per screen using the
menu screen function. The screen numbers of the destination screens are
assigned to numeric keys [1] to [4].
• For details on menu screen setting, refer to the NT11 support tool opera-
tion manual.
For the details of the menu screen setting, refer to the “NT-series Support Tool
Operation Manual” (V061-E1-
@ ).
Screen A
Screen B
Screen C
Screen D
MENU 1: Screen A
2: Screen B
3: Screen C
4: Screen D
key [1]
key [2]
key [3]
key [4]